Electrical Engineering

Single Line Diagram

Single-line diagram (SLD) is a simplified notation for representing a power system. It is a form of block diagram graphically depicting the paths for power flow between entities of the system. It is the first step in designing your solar project, allowing you to become thoroughly familiar with the electrical system layout and design in your facility.

We provides:

1. DC SLD

2. AC SLD

Cable sizing:

The proper sizing of an electrical cable is important to ensure that the cable can:

Current carrying capacity of the cable and its deration. Provide the load with a suitable voltage and avoid excessive voltage drops. Withstand the worst short circuit currents flowing through the cable.

Cable Schedule:

A cable schedule is a table of information about cable lengths for a particular installation. A building floor plan would often be associated with the cable schedule and the type of information shown could include:

Length

Type and size

Colour

Route

Conduit detail

We provides the following details in cable layout:

Cable sizes

DC, AC, and cable route

Earthing

An earthing system or grounding system is circuitry which connects parts of the electric circuit with the ground, thus creating an alternative path for the flow of fault/excessive currents safely into the ground in the presence of minimal resistance or impedance. The primary purpose of earthing is to reduce the risk of serious electric shock from current leaking intouninsulated metal parts of an appliance, power tool, or other electrical devices.

In earthing we will cover:

Earthing Calculations: Earthing Strip size and length calculation, Type of electrods

Earthing pit details: No. pf pits required, chamber details

Combiner/Junction Box

Combiner Boxes can be AC or DC or both depending on the project requirement.

DC Combiner Box:

DC combiner box is a device that combines the output of multiple strings of PV modules for connection to the inverter.

AC Combiner Box:

DC combiner box is a device that combines the output of multiple strings of PV modules for connection to the inverter.

AC combiner box is a device that combines the output of multiple Inverters and gives the single output.

We design Combiner boxes which also provides protection and performance monitoring for photovoltaic systems.

Weather Monitoring & SCADA

A weather monitoring station is a facility, with instruments and equipment for measuring atmospheric conditions to provide information for climate. The measurements taken include temperature, irradiation, humidity, wind speed, wind direction, and precipitation amounts.

SCADA:

Supervisory control and data acquisition) is a system operating with coded signals over communication channels so as to provide control of remote equipment.

We provide the comprehensive communcation layout to insure the proper data acquisition.